Selected Books:


Buy this book!




Buy this book!




Buy this book!




Buy this book!




Buy this book!



German speakers - order books from amazon.de!

Books to UK - order books from amazon.co.uk!

The Online Requests For Comments - RFCs

Home | Books | Bookmark! | Link to Us | Help

RFC 1992 


Network Working Group                                      I. Castineyra
Request for Comments: 1992                                           BBN
Category: Informational                                       N. Chiappa
                                                           M. Steenstrup
                                                                     BBN
                                                             August 1996


                    The Nimrod Routing Architecture

Status of this Memo

   This memo provides information for the Internet community.  This memo
   does not specify an Internet standard of any kind.  Distribution of
   this memo is unlimited.

Abstract

   We present a scalable internetwork routing architecture, called
   Nimrod.  The Nimrod architecture is designed to accommodate a dynamic
   internetwork of arbitrary size with heterogeneous service
   requirements and restrictions and to admit incremental deployment
   throughout an internetwork.  The key to Nimrod's scalability is its
   ability to represent and manipulate routing-related information at
   multiple levels of abstraction.

Table of Contents

   1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 2
   2. Overview of Nimrod . . . . . . . . . . . . . . . . . . . . . . . 3
     2.1 Constraints of the Internetworking Environment  . . . . . . . 3
     2.2 The Basic Routing Functions . . . . . . . . . . . . . . . . . 5
     2.3 Scalability Features  . . . . . . . . . . . . . . . . . . . . 6
       2.3.1 Clustering and Abstraction  . . . . . . . . . . . . . . . 6
       2.3.2 Restricting Information Distribution  . . . . . . . . . . 7
       2.3.3 Local Selection of Feasible Routes  . . . . . . . . . . . 8
       2.3.4 Caching . . . . . . . . . . . . . . . . . . . . . . . . . 8
       2.3.5 Limiting Forwarding Information . . . . . . . . . . . . . 8
   3. Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . 8
     3.1 Endpoints   . . . . . . . . . . . . . . . . . . . . . . . . . 9
     3.2 Nodes and Adjacencies . . . . . . . . . . . . . . . . . . . . 9
     3.3 Maps  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
       3.3.1 Connectivity Specifications  . . . . . . . . . . . . . . 10
     3.4  Locators  . . . . . . . . . . . . . . . . . . . . . . . . . 10
     3.5 Node Attributes  . . . . . . . . . . . . . . . . . . . . . . 11
       3.5.1 Adjacencies  . . . . . . . . . . . . . . . . . . . . . . 11
       3.5.2 Internal Maps  . . . . . . . . . . . . . . . . . . . . . 11
       3.5.3 Transit Connectivity . . . . . . . . . . . . . . . . . . 12



Castineyra, et. al.          Informational                      [Page 1]

RFC 1992              Nimrod Routing Architecture            August 1996


       3.5.4 Inbound Connectivity . . . . . . . . . . . . . . . . . . 12
       3.5.5 Outbound Connectivity  . . . . . . . . . . . . . . . . . 12
   4. Physical Realization  . . . . . . . . . . . . . . . . . . . . . 13
     4.1 Contiguity   . . . . . . . . . . . . . . . . . . . . . . . . 13
     4.2 An Example . . . . . . . . . . . . . . . . . . . . . . . . . 14
     4.3 Multiple Locator Assignment  . . . . . . . . . . . . . . . . 15
   5. Forwarding  . . . . . . . . . . . . . . . . . . . . . . . . . . 20
     5.1 Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
     5.2 Trust  . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
     5.3 Connectivity Specification (CSC) Mode  . . . . . . . . . . . 24
     5.4 Flow Mode  . . . . . . . . . . . . . . . . . . . . . . . . . 25
     5.5 Datagram Mode  . . . . . . . . . . . . . . . . . . . . . . . 25
     5.6 Connectivity Specification Sequence Mode . . . . . . . . . . 26
   6. Security Considerations . . . . . . . . . . . . . . . . . . . . 26
   7. References  . . . . . . . . . . . . . . . . . . . . . . . . . . 26
   7. Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . 27

1. Introduction

   Nimrod is a scalable routing architecture designed to accommodate a
   continually expanding and diversifying internetwork.  First suggested
   by Noel Chiappa, the Nimrod architecture has undergone revision and
   refinement through the efforts of the Nimrod working group of the
   IETF. In this document, we present a detailed description of this
   architecture.

   The goals of Nimrod are as follows:

   1. To support a dynamic internetwork of arbitrary size by
      providing mechanisms to control the amount of routing information
      that must be known throughout an internetwork.

   2. To provide service-specific routing in the presence of multiple
      constraints imposed by service providers and users.

   3. To admit incremental deployment throughout an internetwork.

   We have designed the Nimrod architecture to meet these goals.  The
   key features of this architecture include:

   1. Representation of internetwork connectivity and services in the
      form of maps at multiple levels of abstraction.

   2. User-controlled route generation and selection based on maps and
      traffic service requirements.

   3. User-directed packet forwarding along established paths.




Castineyra, et. al.          Informational                      [Page 2]

RFC 1992              Nimrod Routing Architecture            August 1996


   Nimrod is a general routing architecture that can be applied to
   routing both within a single routing domain and among multiple
   routing domains.  As a general internetwork routing architecture
   designed to deal with increased internetwork size and diversity,
   Nimrod is equally applicable to both the TCP/IP and OSI environments.

2. Overview of Nimrod

   Before describing the Nimrod architecture in detail, we provide an
   overview.  We begin with the internetworking requirements, followed
   by the routing functions, and concluding with Nimrod's scaling
   characteristics.

2.1 Constraints of the Internetworking Environment

   Internetworks are growing and evolving systems, in terms of number,
   diversity, and interconnectivity of service providers and users, and
   therefore require a routing architecture that can accommodate
   internetwork growth and evolution.  A complicated mix of factors such
   as technological advances, political alliances, and service supply
   and demand economics will determine how an internetwork will change
   over time.  However, correctly predicting all of these factors and
   all of their effects on an internetwork may not be possible.  Thus,
   the flexibility of an internetwork routing architecture is its key to
   handling unanticipated requirements.

   In developing the Nimrod architecture, we first assembled a list of
   internetwork environmental constraints that have implications for
   routing.  This list, enumerated below, includes observations about
   the present Internet; it also includes predictions about
   internetworks five to ten years in the future.

   1. The Internet will grow to include O(10^9) networks.

   2. The number of internetwork users may be unbounded.

   3. The capacity of internetwork resources is steadily increasing but
      so is the demand for these resources.

   4. Routers and hosts have finite processing capacity and finite
      memory, and networks have finite transmission capacity.

   5. Internetworks comprise different types of communications media --
      including wireline, optical and wireless, terrestrial and
      satellite, shared multiaccess and point-to-point -- with different
      service characteristics in terms of throughput, delay, error and
      loss distributions, and privacy.




Castineyra, et. al.          Informational                      [Page 3]

RFC 1992              Nimrod Routing Architecture            August 1996


   6. Internetwork elements -- networks, routers, hosts, and processes --
      may be mobile.

   7. Service providers will specify offered services and restrictions on
      access to those services.  Restrictions may be in terms of when a
      service is available, how much the service costs, which users may
      subscribe to the service and for what purposes, and how the user
      must shape its traffic in order to receive a service guarantee.

   8. Users will specify traffic service requirements which may vary
      widely among sessions.  These specifications may be in terms of
      requested qualities of service, the amounts they are willing to pay
      for these services, the times at which they want these services,
      and the providers they wish to use.

   9. A user traffic session may include m sources and n destinations,
      where m, n > or = 1.

   10. Service providers and users have a synergistic relationship.  That
       is, as users develop more applications with special service
       requirements, service providers will respond with the services to
       meet these demands.  Moreover, as service providers deliver more
       services, users will develop more applications that take advantage
       of these services.

   11. Support for varied and special services will require more
       processing, memory, and transmission bandwidth on the part of both
       the service providers offering these services and the users
       requesting these services.  Hence, many routing-related activities
       will likely be performed not by routers and hosts but rather by
       independent devices acting on their behalf to process, store, and
       distribute routing information.

   12. Users requiring specialized services (e.g., high guaranteed
       throughput) will usually be willing to pay more for these services
       and to incur some delay in obtaining them.

   13. Service providers are reluctant to introduce complicated protocols
       into their networks, because they are more difficult to manage.

   14. Vendors are reluctant to implement complicated protocols in their
       products, because they take longer to develop.

   Collectively, these constraints imply that a successful internetwork
   routing architecture must support special features, such as service-
   specific routing and component mobility in a large and changing
   internetwork, using simple procedures that consume a minimal amount
   of internetwork resources.  We believe that the Nimrod architecture



Castineyra, et. al.          Informational                      [Page 4]

RFC 1992              Nimrod Routing Architecture            August 1996


   meets these goals, and we justify this claim in the remainder of this
   document.

2.2 The Basic Routing Functions

   The basic routing functions provided by Nimrod are those provided by
   any routing system, namely:

   1. Collecting, assembling, and distributing the information necessary
      for route generation and selection.

   2. Generating and selecting routes based on this information.

   3. Establishing in routers information necessary for forwarding
      packets along the selected routes.

   4. Forwarding packets along the selected routes.

   The Nimrod approach to providing this routing functionality includes
   map distribution according to the "link-state" paradigm, localization
   of route generation and selection at traffic sources and
   destinations, and specification of packet forwarding through path
   establishment by the sources and destinations.

   Link-state map distribution permits each service provider to have
   control over the services it offers, through both distributing
   restrictions in and restricting distribution of its routing
   information.  Restricting distribution of routing information serves
   to reduce the amount of routing information maintained throughout an
   internetwork and to keep certain routing information private.
   However, it also leads to inconsistent routing information databases
   throughout an internetwork, as not all such databases will be
   complete or identical.  We expect routing information database
   inconsistencies to occur often in a large internetwork, regardless of
   whether privacy is an issue.  The reason is that we expect some
   devices to be incapable of maintaining the complete set of routing
   information for the internetwork.  These devices will select only
   some of the distributed routing information for storage in their
   databases.

   Route generation and selection, based on maps and traffic service
   requirements, may be completely controlled by the users or, more
   likely, by devices acting on their behalf and does not require global
   coordination among routers.  Thus these devices may generate routes
   specific to the users' needs, and only those users pay the cost of
   generating those routes.  Locally-controlled route generation allows
   incremental deployment of and experimentation with new route
   generation algorithms, as these algorithms need not be the same at



Castineyra, et. al.          Informational                      [Page 5]

RFC 1992              Nimrod Routing Architecture            August 1996


   each location in an internetwork.

   Packet forwarding according to paths may be completely controlled by
   the users or the devices acting on their behalf.  These paths may be
   specified in as much detail as the maps permit.  Such packet
   forwarding provides freedom from forwarding loops, even when routers
   in a path have inconsistent routing information.  The reason is that
   the forwarding path is a route computed by a single device and based
   on routing information maintained at a single device.

   We note that the Nimrod architecture and Inter-Domain Policy Routing
   (IDPR) [1] share in common link-state routing information
   distribution, localized route generation and path-oriented message
   forwarding.  In developing the Nimrod architecture, we have drawn
   upon experience gained in developing and experimenting with IDPR.

2.3 Scalability Features

   Nimrod must provide service-specific routing in arbitrarily large
   internetworks and hence must employ mechanisms that help to contain
   the amount of internetwork resources consumed by the routing
   functions.  We provide a brief synopsis of such mechanisms below,
   noting that arbitrary use of these mechanisms does not guarantee a
   scalable routing architecture.  Instead, these mechanisms must be
   used wisely, in order enable a routing architecture to scale with
   internetwork growth.

2.3.1 Clustering and Abstraction

   The Nimrod architecture is capable of representing an internetwork as
   clusters of entities at multiple levels of abstraction.  Clustering
   reduces the number of entities visible to routing.  Abstraction
   reduces the amount of information required to characterize an entity
   visible to routing.

   Clustering begins by aggregating internetwork elements such as hosts,
   routers, and networks according to some predetermined criteria.
   These elements may be clustered according to relationships among
   them, such as "managed by the same authority", or so as to satisfy
   some objective function, such as "minimize the expected amount of
   forwarding information stored at each router".  Nimrod does not
   mandate a particular cluster formation algorithm.

   New clusters may be formed by clustering together existing clusters.
   Repeated clustering of entities produces a hierarchy of clusters with
   a unique universal cluster that contains all others.  The same
   clustering algorithm need not be applied at each level in the
   hierarchy.



Castineyra, et. al.          Informational                      [Page 6]

RFC 1992              Nimrod Routing Architecture            August 1996


   All elements within a cluster must satisfy at least one relation,
   namely connectivity.  That is, if all elements within a cluster are
   operational, then any two of them must be connected by at least one
   route that lies entirely within that cluster.  This condition
   prohibits the formation of certain types of separated clusters, such
   as the following.  Suppose that a company has two branches located at
   opposite ends of a country and that these two branches must
   communicate over a public network not owned by the company.  Then the
   two branches cannot be members of the same cluster, unless that
   cluster also includes the public network connecting them.

   Once the clusters are formed, their connectivity and service
   information is abstracted to reduce the representation of cluster
   characteristics.  Example abstraction procedures include elimination
   of services provided by a small fraction of the elements in the
   cluster or expression of services in terms of average values.  Nimrod
   does not mandate a particular abstraction algorithm.  The same
   abstraction algorithm need not be applied to each cluster, and
   multiple abstraction algorithms may be applied to a single cluster.

   A particular combination of clustering and abstraction algorithms
   applied to an internetwork results in an organization related to but
   distinct from the physical organization of the component hosts,
   routers, and networks.  When a clustering is superimposed over the
   physical internetwork elements, the cluster boundaries may not
   necessarily coincide with host, router, or network boundaries.
   Nimrod performs its routing functions with respect to the hierarchy
   of entities resulting from clustering and abstraction, not with
   respect to the physical realization of the internetwork.  In fact,
   Nimrod need not even be aware of the physical elements of an
   internetwork.

2.3.2 Restricting Information Distribution

   The Nimrod architecture supports restricted distribution of routing
   information, both to reduce resource consumption associated with such
   distribution and to permit information hiding.  Each cluster
   determines the portions of its routing information to distribute and
   the set of entities to which to distribute this information.
   Moreover, recipients of routing information are selective in which
   information they retain.  Some examples are as follows.  Each cluster
   might automatically advertise its routing information to its siblings
   (i.e., those clusters with a common parent cluster).  In response to
   requests, a cluster might advertise information about specific
   portions of the cluster or information that applies only to specific
   users.  A cluster might only retain routing information from clusters
   that provide universal access to their services.




Castineyra, et. al.          Informational                      [Page 7]

RFC 1992              Nimrod Routing Architecture            August 1996


2.3.3 Local Selection of Feasible Routes

   Generating routes that satisfy multiple constraints is usually an
   NP-complete problem and hence a computationally intensive procedure.
   With Nimrod, only those entities that require routes with special
   constraints need assume the computational load associated with
   generation and selection of such routes.  Moreover, the Nimrod
   architecture allows individual entities to choose their own route
   generation and selection algorithms and hence the amount of resources
   to devote to these functions.

2.3.4 Caching

   The Nimrod architecture encourages caching of acquired routing
   information in order to reduce the amount of resources consumed and
   delay incurred in obtaining the information in the future.  The set
   of routes generated as a by-product of generating a particular route
   is an example of routing information that is amenable to caching;
   future requests for any of these routes may be satisfied directly
   from the route cache.  However, as with any caching scheme, the
   cached information may become stale and its use may result in poor
   quality routes.  Hence, the routing information's expected duration
   of usefulness must be considered when determining whether to cache
   the information and for how long.

2.3.5 Limiting Forwarding Information

   The Nimrod architecture supports two separate approaches for
   containing the amount of forwarding information that must be
   maintained per router.  The first approach is to multiplex, over a
   single path (or tree, for multicast), multiple traffic flows with
   similar service requirements.  The second approach is to install and
   retain forwarding information only for active traffic flows.

   With Nimrod, the service providers and users share responsibility for
   the amount of forwarding information in an internetwork.  Users have
   control over the establishment of paths, and service providers have
   control over the maintenance of paths.  This approach is different
   from that of the current Internet, where forwarding information is
   established in routers independent of demand for this information.

3. Architecture

   Nimrod is a hierarchical, map-based routing architecture that has
   been designed to support a wide range of user requirements and to
   scale to very large dynamic internets.  Given a traffic stream's
   description and requirements (both quality of service requirements
   and usage-restriction requirements), Nimrod's main function is to



Castineyra, et. al.          Informational                      [Page 8]

RFC 1992              Nimrod Routing Architecture            August 1996


   manage in a scalable fashion how much information about the
   internetwork is required to choose a route for that stream, in other
   words, to manage the trade-off between amount of information about
   the internetwork and the quality of the computed route.  Nimrod is
   implemented as a set of protocols and distributed databases.  The
   following sections describe the basic architectural concepts used in
   Nimrod.  The protocols and databases are specified in other
   documents.

3.1 Endpoints

   The basic entity in Nimrod is the endpoint.  An endpoint represents a
   user of the internetwork layer: for example, a transport connection.
   Each endpoint has at least one endpoint identifier (EID). Any given
   EID corresponds to a single endpoint.  EIDs are globally unique,
   relatively short "computer-friendly" bit strings---for example, small
   multiples of 64 bits.  EIDs have no topological significance
   whatsoever.  For ease of management, EIDs might be organized
   hierarchically, but this is not required.

   BEGIN COMMENT

      In practice, EIDs will probably have a second form, which we can
      call the endpoint label (EL). ELs are ASCII strings of unlimited
      length, structured to be used as keys in a distributed database
      (much like DNS names).  Information about an endpoint---for
      example, how to reach it---can be obtained by querying this
      distributed database using the endpoint's label as key.

   END COMMENT

3.2 Nodes and Adjacencies

   A node represents a region of the physical network.  The region of
   the network represented by a node can be as large or as small as
   desired: a node can represent a continent or a process running inside
   a host.  Moreover, as explained in section 4, a region of the network
   can simultaneously be represented by more than one node.

   An adjacency consists of an ordered pair of nodes.  An adjacency
   indicates that traffic can flow from the first node to the second.

3.3 Maps

   The basic data structure used for routing is the map.  A map
   expresses the available connectivity between different points of an
   internetwork.  Different maps can represent the same region of a
   physical network at different levels of detail.



Castineyra, et. al.          Informational                      [Page 9]

RFC 1992              Nimrod Routing Architecture            August 1996


   A map is a graph composed of nodes and adjacencies.  Properties of
   nodes are contained in attributes associated with them.  Adjacencies
   have no attributes.  Nimrod defines languages to specify attributes
   and to describe maps.

   Maps are used by routers to generate routes.  In general, it is not
   required that different routers have consistent maps.

   BEGIN COMMENT

      Nimrod has been designed so that there will be no routing loops
      even when the routing databases of different routers are not
      consistent.  A consistency requirement would not permit
      representing the same region of the internetwork at different
      levels of detail.  Also, a routing-database consistency
      requirement would be hard to guarantee in the very large internets
      Nimrod is designed to support.

   END COMMENT

   In this document we speak only of routers.  By "router" we mean a
   physical device that implements functions related to routing: for
   example, forwarding, route calculation, path set-up.  A given device
   need not be capable of doing all of these to be called a router.  The
   protocol specification document, see [2], splits these
   functionalities into specific agents.

3.3.1 Connectivity Specifications

   By connectivity between two points we mean the available services and
   the restrictions on their use.  Connectivity specifications are among
   the attributes associated with nodes.  The following are informal
   examples of connectivity specifications:

  o "Between these two points, there exists best-effort service with no
    restrictions."

  o "Between these two points, guaranteed 10 ms delay can be arranged for
    traffic streams whose data rate is below 1 Mbyte/sec and that have low
    (specified) burstiness."

  o "Between these two points, best-effort service is offered, as long as
    the traffic originates in and is destined for research organizations."

3.4 Locators

   A locator is a string of binary digits that identifies a location in
   an internetwork.  Nodes and endpoint are assigned locators.



Castineyra, et. al.          Informational                     [Page 10]

RFC 1992              Nimrod Routing Architecture            August 1996


   Different nodes have necessarily different locators.  A node is
   assigned only one locator.  Locators identify nodes and specify
   *where* a node is in the network.  Locators do *not* specify a path
   to the node.  An endpoint can be assigned more than one locator.  In
   this sense, a locator might appear in more than one location of an
   internetwork.

   In this document locators are written as ASCII strings that include
   colons to underline node structure: for example, a:b:c.  This does
   not mean that the representation of locators in packets or in
   databases will necessarily have something equivalent to the colons.

   A given physical element of the network might help implement more
   than one node---for example, a router might be part of two different
   nodes.  Though this physical element might therefore be associated
   with more than one locator, the nodes that this physical element
   implements have each only one locator.

   The connectivity specifications of a node are identified by a tuple
   consisting of the node's locator and an ID number.

   All map information is expressed in terms of locators, and routing
   selections are based on locators.  EIDs are *not* used in making
   routing decisions---see section 5.

3.5 Node Attributes

   The following are node attributes defined by Nimrod.

3.5.1 Adjacencies

   Adjacencies appear in maps as attributes of both the nodes in the
   adjacency.  A node has two types of adjacencies associated with it:
   those that identify a neighboring node to which the original node can
   send data to; and those that identivy a neighboring node that can
   send data to the original node.

3.5.2 Internal Maps

   As part of its attributes, a node can have internal maps.  A router
   can obtain a node's internal maps---or any other of the node's
   attributes, for that matter---by requesting that information from a
   representative of that node.  (A router associated with that node can
   be such a representative.)  A node's representative can in principle
   reply with different internal maps to different requests---for
   example, because of security concerns.  This implies that different
   routers in the network might have different internal maps for the
   same node.



Castineyra, et. al.          Informational                     [Page 11]

RFC 1992              Nimrod Routing Architecture            August 1996


   A node is said to own those locators that have as a prefix the
   locator of the node.  In a node that has an internal map, the
   locators of all nodes in this internal map are prefixed by the
   locator of the original node.

   Given a map, a more detailed map can be obtained by substituting one
   of the map's nodes by one of that node's internal maps.  This process
   can be continued recursively.  Nimrod defines standard internal maps
   that are intended to be used for specific purposes.  A node's
   "detailed map" gives more information about the region of the network
   represented by the original node.  Typically, it is closer to the
   physical realization of the network than the original node.  The
   nodes of this map can themselves have detailed maps.

3.5.3 Transit Connectivity

   For a given node, this attribute specifies the services available
   between nodes adjacent to the given node.  This attribute is
   requested and used when a router intends to route traffic *through* a
   node.  Conceptually, the traffic connectivity attribute is a matrix
   that is indexed by a pair of locators: the locators of adjacent
   nodes.  The entry indexed by such a pair contains the connectivity
   specifications of the services available across the given node for
   traffic entering from the first node and exiting to the second node.

   The actual format of this attribute need not be a matrix.  This
   document does not specify the format for this attribute.

3.5.4 Inbound Connectivity

   For a given node, this attribute represents connectivity from
   adjacent nodes to points within the given node.  This attribute is
   requested and used when a router intends to route traffic to a point
   within the node but does not have, and either cannot or does not want
   to obtain, a detailed map of the node.  The inbound connectivity
   attribute identifies what connectivity specifications are available
   between pairs of locators.  The first element of the pair is the
   locator of an adjacent node; the second is a locator owned by the
   given node.

3.5.5 Outbound Connectivity

   For a given node, this attribute represents connectivity from points
   within the given node to adjacent nodes.  This attribute identifies
   what connectivity specifications are available between pairs of
   locators.  The first element of the pair is a locator owned by the
   given node, the second is the locator of an adjacent node.




Castineyra, et. al.          Informational                     [Page 12]

RFC 1992              Nimrod Routing Architecture            August 1996


   The Transit, Inbound and Outbound connectivity attributes together
   wiht a list of adjacencies form the "abstract map."

4. Physical Realization

   A network is modeled as being composed of physical elements: routers,
   hosts, and communication links.  The links can be either point-to-
   point---e.g., T1 links---or multi-point---e.g., ethernets, X.25
   networks, IP-only networks, etc.

   The physical representation of a network can have associated with it
   one or more Nimrod maps.  A Nimrod map is a function not only of the
   physical network, but also of the configured clustering of elements
   (locator assignment) and of the configured connectivity.

   Nimrod has no pre-defined "lowest level": for example, it is possible
   to define and advertise a map that is physically realized inside a
   CPU. In this map, a node could represent, for example, a process or a
   group of processes.  The user of this map need not necessarily know
   or care.  ("It is turtles all the way down!", in [3] page 63.)

4.1 Contiguity

   Locators sharing a prefix must be assigned to a contiguous region of
   a map.  That is, two nodes in a map that have been assigned locators
   sharing a prefix should be connected to each other via nodes that
   themselves have been assigned locators with that prefix.  The main
   consequence of this requirement is that "you cannot take your locator
   with you."

   As an example of this, see figure 1, consider two providers x.net and
   y.net (these designations are *not* locators but DNS names) which
   appear in a Nimrod map as two nodes with locators A and B. Assume
   that corporation z.com (also a DNS name) was originally connected to
   x.net.  Locators corresponding to elements in z.com are, in this
   example, A-prefixed.  Corporation z.com decides to change providers-
   --severing its physical connection to x.net.  The connectivity
   requirement described in this section implies that, after the
   provider change has taken place, elements in z.com will have been, in
   this example, assigned B-prefixed locators and that it is not
   possible for them to receive data destined to A-prefixed locators
   through y.net.









Castineyra, et. al.          Informational                     [Page 13]

RFC 1992              Nimrod Routing Architecture            August 1996


                  A                 B
               +------+          +------+
               | x.net|          | y.net|
               +------+         /+------+
                               /
                        +-----+
                        |z.com|
                        +-----+



             Figure 1:  Connectivity after switching providers

   The contiguity requirement simplifies routing information exchange:
   if it were permitted for z.com to receive A-prefixed locators through
   y.net, it would be necessary that a map that contains node B include
   information about the existence of a group of A-prefixed locators
   inside node B. Similarly, a map including node A would have to
   include information that the set of A-prefixed locators asigned to
   z.com is not to be found within A. The more situations like this
   happen, the more the hierarchical nature of Nimrod is subverted to
   "flat routing." The contiguity requirement can also be expressed as
   "EIDs are stable; locators are ephemeral."

4.2 An Example

   Figure 2 shows a physical network.  Hosts are drawn as squares,
   routers as diamonds, and communication links as lines.  The network
   shown has the following components: five ethernets ---EA through EE;
   five routers---RA through RE; and four hosts---HA through HD. Routers
   RA, RB, and RC interconnect the backbone ethernets---EB, EC and ED.
   Router RD connects backbone EC to a network consisting of ethernet EA
   and hosts HA and HB.  Router RE interconnects backbone ED to a
   network consisting of ethernet EE and hosts HC and HD. The assigned
   locators appear in lower case beside the corresponding physical
   entity.

   Figure 3 shows a Nimrod map for that network.  The nodes of the map
   are represented as squares.  Lines connecting nodes represent two
   adjacencies in opposite directions.  Different regions of the network
   are represented at different detail.  Backbone b1 is represented as a
   single node.  The region of the network with locators prefixed by "a"
   is represented as a single node.  The region of the network with
   locators prefixed by "c" is represented in full detail.







Castineyra, et. al.          Informational                     [Page 14]

RFC 1992              Nimrod Routing Architecture            August 1996


4.3 Multiple Locator Assignment

   Physical elements can form part of, or implement, more than one node.
   In this sense it can be said that they can be assigned more than one
   locator.  Consider figure 4, which shows a physical network.  This
   network is composed of routers (RA, RB, RC, and RD), hosts (HA, HB,
   and HC), and communication links.  Routers RA, RB, and RC are
   connected with point-to-point links.  The two horizontal lines in the
   bottom of the figure represent ethernets.  The figure also shows the
   locators assigned to hosts and routers.

   In figure 4, RA and RB have each been assigned one locator (a:t:r1
   and b:t:r1, respectively).  RC has been assigned locators a:y:r1 and
   b:d:r1; one of these two locators shares a prefix with RA's locator,
   the other shares a prefix with RB's locator.  Hosts HA and HB have
   each been assigned three locators.  Host HC has been assigned one
   locator.  Depending on what communication paths have been set up
   between points, different Nimrod maps result.  A possible Nimrod map
   for this network is given in figure 5.
































Castineyra, et. al.          Informational                     [Page 15]

RFC 1992              Nimrod Routing Architecture            August 1996


                                             a:h1 +--+      a:h2 +--+
                                                  |HA|           |HB|
                                                  |  |           |  |
                                                  +--+           +--+
                                           a:e1    |              |
                                               --------------------- EA
                                                       |
                                 /\                    /\
                                /RB\ b1:r1            /RD\ b2:r1
                               /\  /\                 \  /
                              /  \/  \                 \/
    EB         b1:t:e1       /        \                 |   EC
    ------------------------          -------------------------- b2:e1
               /                             \
              /                               \
             /\                                \
            /RA\ b1:r2                          \/\
            \  /                                /RC\  b2:t:r2
             \/                                 \  /
               \                                 \/
                \                               /   ED
                  ----------------------------------- b3:t:e1
                                    |
                                    |
                                    |
                                   /\
                                  /RE\ b3:t:r1
                                  \  /
                      EE           \/
                      -----------------------------   c:e1
                         |                   |
                        +--+                +--+
                        |HC|   c:h1         |HD|    c:h2
                        |  |                |  |
                        +--+                +--+


                    Figure 2:  Example Physical Network













Castineyra, et. al.          Informational                     [Page 16]

RFC 1992              Nimrod Routing Architecture            August 1996


                             +-----+               +-----+
   +----------+              |     |               |     |
   |          |--------------| b2  | --------------| a   |
   |          |              |     |               |     |
   |    b1    |              +-----+               +-----+
   |          |                 |
   |          |                 |
   |          |                 |
   +----------+                 |
               \                |
                \               |
                 \              |
                  \             |
                   \         +--------+
                    \        |        |
                     ------- | b3:t:e1|
                             |        |
                             +--------+
                                |
                                |
                                |
                                |
                             +-------+
                             |       |
                             |b3:t:r1|
                             |       |
                             +-------+
                                  |
                 +-----+       +-----+     +-----+
                 |     |       |     |     |     |
                 | c:h1|-------| c:e1|-----| c:h2|
                 |     |       |     |     |     |
                 +-----+       +-----+     +-----+



                           Figure 3:  Nimrod Map














Castineyra, et. al.          Informational                     [Page 17]

RFC 1992              Nimrod Routing Architecture            August 1996


                      a:t:r1              b:t:r1
                         +--+            +--+
                         |RA|------------|RB|
                         +--+            +--+
                           \             /
                            \           /
                             \         /
                              \       /
                               \     /
                                \   /
                                 \ /
                                  \
                                 +--+
                                 |RC|  a:y:r1
                                 +--+  b:d:r1
                                  |
                     ---------------------------
                      |        |             |
             a:y:h1  +--+     +--+          +--+    a:y:h2
             b:d:h2  |HA|     |RD| c:r1     |HB|    b:d:h1
             c:h1    +--+     +--+          +--+    c:h2
                                |
                                |
                         --------------------
                                  |
                                 +--+
                                 |HC| c:h3
                                 +--+




                        Figure 4:  Multiple Locators


















Castineyra, et. al.          Informational                     [Page 18]

RFC 1992              Nimrod Routing Architecture            August 1996


           a                       b                   c
     +-------------+       +-------------+         +---------------+
     |             |       |             |         |               |
     |        a:t  |       |      b:t    |         |               |
     |   +--+      |       |  +--+       |         |               |
     |   |  |--------------|--|  |       |         |               |
     |   +--+      |       |  +--+       |         |               |
     |     |       |       |    |        |         |               |
     |   +--+      |       |  +--+       |         |               |
     |   +  +      |       |  +  +       |         |               |
     |   +--+ a:y  |       |  +--+ b:d   |         |               |
     |             |       |             |         |               |
     +-------------+       +-------------+         +---------------+




                           Figure 5:  Nimrod Map

   Nodes and adjacencies represent the *configured* clustering and
   connectivity of the network.  Notice that even though a:y and b:d are
   defined on the same hardware, the map shows no connection between
   them: this connection has not been configured.  A packet given to
   node `a' addressed to a locator prefixed with "b:d" would have to
   travel from node a to node b via the arc joining them before being
   directed towards its destination.  Similarly, the map shows no
   connection between the c node and the other two top level nodes.  If
   desired, these connections could be established, which would
   necessitate setting up the exchange of routing information.  Figure 6
   shows the map when these connections have been established.

   In the strict sense, Nimrod nodes do not overlap: they are distinct
   entities.  But, as we have seen in the previous example, a physical
   element can be given more than one locator, and, in that sense,
   participate in implementing more than one node.  That is, two
   different nodes might be defined on the same hardware.  In this
   sense, Nimrod nodes can be said to overlap.  But to notice this
   overlap one would have to know the physical-to-map correspondence.
   It is not possible to know when two nodes share physical assets by
   looking only at a Nimrod map.











Castineyra, et. al.          Informational                     [Page 19]

RFC 1992              Nimrod Routing Architecture            August 1996


5. Forwarding

   Nimrod supports four forwarding modes:

 1. Connectivity Specification Chain (CSC) mode: In this mode, packets
    carry a list of connectivity specifications.  The packet is
    required to go through the nodes that own the connectivity
    specifications using the services specified.  The nodes associated
    with the listed connectivity specifications should define a
    continuous path in the map.  A more detailed description of the
    requirements of this mode is given in section 5.3.








































Castineyra, et. al.          Informational                     [Page 20]

RFC 1992              Nimrod Routing Architecture            August 1996


   +--------+                                               +--------+
   |        |                                               |        |
   | a:t:r1 |-----------------------------------------------| b:t:r1 |
   |        |                                               |        |
   +--------+                                               +--------+
     |                                                             |
     |                                                             |
     |         /-----------------------------------------\         |
     |         |                                         |         |
     |         |                                         |         |
     |  +--------+       +--------+                    +--------+  |
     |  |        |       |        |                    |        |  |
     |  | a:y:h1 --------|  c:h1  |--------------------| b:d:h1 |  |
     |  |        |       |        |                    |        |  |
     |  +--------+       +--------+                    +--------+  |
     |    |    |           |    |                        |    |    |
   +--------+  |           |  +------+  +------+         |  +--------+
   |        |  |           |  |      |  |      |         |  |        |
   | a:y:r1 |  |           |  | c:r1 |--| c:h3 |         |  | b:d:r1 |
   |        |  |           |  |      |  |      |         |  |        |
   +--------+  |           |  +------+  +------+         |  +--------+
     |    |    |           |    |                        |    |    |
     |  +--------+       +--------+                    +--------+  |
     |  |        |       |        |                    |        |  |
     |  | a:y:h2 |--------  c:h2  |--------------------| b:d:h2 |  |
     |  |        |       |        |                    |        |  |
     |  +--------+       +--------+                    +--------+  |
     |         |                                         |         |
     |         |                                         |         |
     |         |                                         |         |
     |         \-----------------------------------------/         |
     \-------------------------------------------------------------/



                          Figure 6:  Nimrod Map II


 2. Connectivity Specifications Sequence (CSS) mode: In this mode,
    packets carry a list of connectivity specifications.  The packet
    is supposed to go sequentially through the nodes that own each one
    of the listed connectivity specifications in the order they were
    specified.  The nodes need not be adjacent.  This mode can be seen
    as a generalization of the CSC mode.  Notice that CSCs are said to
    be a *chains* of locators, CSSs are *sequences* of locators.  This
    difference emphasizes the contiguity requirement in CSCs.  A
    detailed description of this mode is in section 5.6.




Castineyra, et. al.          Informational                     [Page 21]

RFC 1992              Nimrod Routing Architecture            August 1996


 3. Flow mode: In this mode, the packet includes a path-id that
    indexes state that has been previously set up in routers along the
    path.  Packet forwarding when flow state has been established is
    relatively simple: follow the instructions in the routers' state.
    Nimrod includes a mechanism for setting up this state.  A more
    detailed description of this mode can be found in section 5.4.

 4. Datagram mode: in this mode, every packet carries source and
    destination locators.  This mode can be seen as a special case of
    the CSS mode.  Forwarding is done following procedures as
    indicated in section 5.5.

    BEGIN COMMENT

    The obvious parallels are between CSC mode and IPV4's strict
    source route and between CSS mode and IPV4's loose source route.

    END COMMENT

   In all of these modes, the packet may also carry locators and EIDs
   for the source and destinations.  In normal operation, forwarding
   does not take the EIDs into account, only the receiver does.  EIDs
   may be carried for demultiplexing at the receiver, and to detect
   certain error conditions.  For example, if the EID is unknown at the
   receiver, the locator and EID of the source included in the packet
   could be used to generate an error message to return to the source
   (as usual, this error message itself should probably not be allowed
   to be the cause of other error messages).  Forwarding can also use
   the source locator and EID to respond to error conditions, for
   example, to indicate to the source that the state for a path-id
   cannot be found.

   Packets can be visualized as moving between nodes in a map.  A packet
   indicates, implicitly or explicitly, a destination locator.  In a
   packet that uses the datagram, CSC, or CSS forwarding mode, the
   destination locator is explicitly indicated .  In a packet that uses
   the flow forwarding mode, the destination locator is implied by the
   path-id and the distributed state in the network (it might also be
   included explicitly).  Given a map, a packet moves to the node in
   this map to which the associated destination locator belongs.  If the
   destination node has a "detailed" internal map, the destination
   locator must belong to one of the nodes in this internal map
   (otherwise it is an error).  The packet goes to this node (and so on,
   recursively).







Castineyra, et. al.          Informational                     [Page 22]

RFC 1992              Nimrod Routing Architecture            August 1996


5.1 Policy

   CSC and CSS mode implement policy by specifying the connectivity
   specifications associated with those nodes that the packet should
   traverse.  Strictly speaking, there is no policy information included
   in the packet.  That is, in principle, it is not possible to
   determine what criteria were used to select the route by looking at
   the packet.  The packet only contains the results of the route
   generation process.  Similarly, in a flow mode packet, policy is
   implicit in the chosen route.

   A datagram-mode packet can indicate a limited form of policy routing
   by the choice of destination and source locators.  For this choice to
   exist, the source or destination endpoints must have several locators
   associated with them.  This type of policy routing is capable of, for
   example, choosing providers.

5.2 Trust

   A node that chooses not to divulge its internal map can work
   internally any way its administrators decide, as long as the node
   satisfies its external characterization as given in its Nimrod map
   advertisements.  Therefore, the advertised Nimrod map should be
   consistent with a node's actual capabilities.  For example, consider
   the network shown in figure 7 which shows a physical network and the
   advertised Nimrod map.  The physical network consists of hosts and a
   router connected together by an ethernet.  This node can be sub-
   divided into component nodes by assigning locators as shown in the
   figure and advertising the map shown.  The map seems to imply that it
   is possible to send packets to node a:x without these being
   observable by node a:y; however, this is actually not enforceable.

   In general, it is reasonable to ask how much trust should be put in
   the maps obtained by a router.  Even when a node is "trustworthy,"
   and the information received from the node has been authenticated,
   there is always the possibility of an honest mistake.















Castineyra, et. al.          Informational                     [Page 23]

RFC 1992              Nimrod Routing Architecture            August 1996


                                 +--+
                                 |RA| a:r1
                                 +--+
                                  |
                                  |
                                  |
                                  |
                     -------------------------------
                         |                       |
                        +--+                    +--+
                        |Ha| a:x:h1             |Ha| a:y:h2
                        +--+                    +--+


                               Physical Network


                      a             |
                   +----------------|--------------------
                   |                |                   |
                   |              +----+                |
                   |              |a:r1|                |
                   |   a:x        +----+  a:y           |
                   |   +------+  /      \ +-------+     |
                   |   |      | /        \|       |     |
                   |   |      |           |       |     |
                   |   |      |           |       |     |
                   |   +------+           +-------+     |
                   |                                    |
                   + -----------------------------------+


                               Advertised Nimrod Map




                    Figure 7:  Example of Misleading Map

5.3 Connectivity Specification (CSC) Mode

   Routing for a CSC packet is specified by a list of connectivity
   specifications carried in the packet.  These are the connectivity
   specifications that make the specified path, in the order that they
   appear along the path.  These connectivity specifications are
   attributes of nodes.  The route indicated by a CSC packet is specifed
   in terms of connectivity specifications rather than physical
   entities:  a connectivity specification in a CSC-mode packet would



Castineyra, et. al.          Informational                     [Page 24]

RFC 1992              Nimrod Routing Architecture            August 1996


   correspond to a type of service between two points of the network
   without specifying the physical path.

   Given two connectivity specifications that appear consecutively in
   the a CSC-mode packet, there should exist an adjacency going from the
   node corresponding to the first connectivity specification to the
   node corresponding to the second connectivity specification.  The
   first connectivity specification referenced in a CSC-mode packet
   should be an outbound connectivity specification; similarly, the last
   connectivity specification referenced in a CSC-mode packet should be
   an inbound connectivity specification; the rest should be transit
   connectivity specifications.

5.4 Flow Mode

   A flow mode packet includes a path-id field.  This field identifies
   state that has been established in intermediate routers.  The packet
   might also contain locators and EIDs for the source and destination.
   The setup packet also includes resource requirements.  Nimrod
   includes protocols to set up and modify flow-related state in
   intermediate routers.  These protocols not only identify the
   requested route, but also describe the resources requested by the
   flow---e.g., bandwidth, delay, etc.  The result of a set-up attempt
   might be either confirmation of the set-up or notification of its
   failure.  The source-specified routes in flow mode setup are
   specified in terms of CSSs.

5.5 Datagram Mode

   A realistic routing architecture must include an optimization for
   datagram traffic, by which we mean user transactions which consist of
   single packets, such as a lookup in a remote translation database.
   Either of the two previous modes contains unacceptable overhead if
   much of the network traffic consists of such datagram transactions.
   A mechanism is needed which is approximately as efficient as the
   existing IPv4 "hop-by-hop" mechanism.  Nimrod has such a mechanism.

   The scheme can be characterized by the way it divides the state in a
   datagram network between routers and the actual packets.  In IPv4,
   most packets currently contain only a small amount of state
   associated with the forwarding process ("forwarding state")---the hop
   count.  Nimrod proposes that enlarging the amount of forwarding state
   in packets can produce a system with useful properties.  It was
   partially inspired by the efficient source routing mechanism in SIP
   [5], and the locator pointer mechanism in PIP [6]).

   Nimrod datagram mode uses pre-set flow-mode state to support a
   strictly non-looping path, but without a source-route.



Castineyra, et. al.          Informational                     [Page 25]

RFC 1992              Nimrod Routing Architecture            August 1996


5.6 Connectivity Specification Sequence Mode

   The connectivity specification sequence mode specifies a route by a
   list of connectivity specifications.  There are no contiguity
   restrictions on consecutive connectivity specifications.

    BEGIN COMMENT

    The CSS and CSC modes can be seen as combination of the datagram
    and flow modes.  Therefore, in a sense, the basic forwarding modes
    of Nimrod are just these last two.

    END COMMENT

6. Security Considerations

   Security issues are not addressed in this document.

7. References

   [1] Steenstrup, M., "Inter-Domain Policy Routing Protocol
       Specification: Version 1," RFC 1479, June 1993.

   [2] Steenstrup M., and R. Ramanathan, "Nimrod Functionality and
       Protocols Specification," Work in Progress, February 1996.

   [3] Wright, R., "Three Scientists and their Gods Looking for Meaning
       in an Age of Information", New York: Times Book, first ed., 1988.

   [4] Deering, S., "SIP: Simple Internet Protocol," IEEE Network, vol.
       7, May 1993.

   [5] Francis, P., "A Near-Term Architecture for Deploying Pip," IEEE
       Network, vol. 7, May 1993.

















Castineyra, et. al.          Informational                     [Page 26]

RFC 1992              Nimrod Routing Architecture            August 1996


8. Authors' Addresses

   Isidro Castineyra
   BBN Systems and Technologies
   10 Moulton Street
   Cambridge, MA 02138

   Phone:  (617) 873-6233
   EMail:  isidro@bbn.com


   Noel Chiappa
   EMail:  gnc@ginger.lcs.mit.edu

   Martha Steenstrup
   BBN Systems and Technologies
   10 Moulton Street
   Cambridge, MA 02138

   Phone:  (617) 873-3192
   EMail:  msteenst@bbn.com






























Castineyra, et. al.          Informational                     [Page 27]





RFC Search. Copyright ©1999 by Dodoland Co.
Web design ©1999 by WebYou.com


Selected Books:


Buy this book!



    
Buy this book!



    
Buy this book!



    
Buy this book!



    
Buy this book!